Epson EX21 - Connecting an S-Video Source

22 Setting Up the Projector
2. If you want to play sound through the projector, see page 26 for
instructions on connecting an audio cable.
When you’ve finished making connections, see page 26 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
Connecting an S-Video Source
1. Connect the S-Video cable to the S-Video connector on your
player and the
S-Video port on the projector.
2. If you want to play sound through the projector, see page 26 for
instructions on connecting an audio cable.
When you’ve finished making connections, see page 26 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
note
If the S-Video cable was not
p
rovided with your video
device, you can purchase one
f
rom Epson; see page 11.
S-Video port