Epson EX31 User Manual

36 Setting Up the Projector
When you’ve finished making connections, see page 40 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
Connecting an RGB Video Source
You can connect to an RGB video source using the VGA computer
cable provided with the projector.
1. Connect the cable to the RGB video port on your player and the
Computer (Component Video) port on the projector.
2. You may need to change the
Input Signal setting in the
projector’s Signal menu to
RGB (see page 68).
3. If you want to play sound through the projector, see page 37 for
instructions on connecting audio cables.
Computer (Component
Video) port
EX31
EX51/EX71
Computer (Component
Video) port

Epson EX31 Specifications

Projection System

projection system	Epson 3LCD, 3-chip technology
projection method	Front/rear/ceiling mount
driving method	Epson Poly-silicon TFT Active Matrix

Display Performance

white light output	2500 lumens
color light output	2500 lumens
native resolution	800 x 600 (SVGA)

Power and Consumption

power supply voltage	100 – 240 V ±10%, 50/60 Hz
power consumption	280 W, 0.3 W standby
lamp type	200 W UHE

Operating Environment

operating temperature	41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
fan noise (normal mode)	34 dB
fan noise (eco mode)	29 dB

Dimensions and Weight

dimensions including feet	11.6" x 9.0" x 3.1"
dimensions excluding feet	11.6" x 9.0" x 3.0"
weight	5.1 lb