6
Setting Up the Printer
1-3 Assembling the Printer
Follow the steps in this section to attach the paper guide and
install the ribbon cartridge.
Attaching the paper guide
To attach the paper guide to your printer, insert the tabs on the
paper guide straight down into the mounting slots on the printer.
Then place the paper guide in the upright position.
Note:
You can use the paper guide only when the tractor is installed in the
front or rear push position. To switch from printing on single sheets
using the paper guide to printing on continuous paper from a tractor,
see “Switching Between Continuous Paper and Single Paper” in the
Reference Guide.
To Next Page
Loading...
