Epson L3050 Series User Manual

1. Place the originals.
By placing multiple originals on the scanner glass, you can scan them all at the same time. Make sure there is a
gap of at least 20 mm between the originals.
2. Start Epson Scan 2.
3. Select Photo Mode from the Mode list.
4. Make the following settings on the Main Settings tab.
❏ Image Type: Select the color for saving the scanned image.
❏ Resolution: Select the resolution.
Note:
e Document Source setting is xed as Scanner Glass, and the Document Type setting is xed as Reective.
(Reective means originals which are not transparent, for example ordinary papers or photos.) You cannot change these
settings.
User's Guide
Scanning
60

Epson L3050 Series Specifications

General

Print Technology	Inkjet
Maximum Resolution	5760 x 1440 dpi
Print Speed (Black)	33 ppm
Print Speed (Color)	15 ppm
Scanner Type	Flatbed color image scanner
Scan Resolution	1200 x 2400 dpi
Functions	Print, Scan, Copy
Copy Speed (Black)	7.7 ipm
Copy Speed (Color)	3.8 ipm
Output Tray Capacity	30 sheets
Operating Systems	Windows XP / Vista / 7 / 8 / 8.1 / 10, Mac OS X 10.6.8 or later
Connectivity	USB
Paper Sizes	A4, A5, A6, B5, Letter, Legal
Input Tray Capacity	100 sheets
Print Technology (Detail)	Micro Piezo
Ink Tank Capacity	70ml (each color)
Ink Type	Epson DURABrite Ultra pigment ink (Black, Cyan, Magenta, Yellow)