34
6. Enter your wireless password (or network name and then password).
• To enter characters, press the up or down arrow button.
• To change the character case or type, press the reset button.
• To move the cursor to the right or to add a space, press the right arrow button.
• To delete the previous character, press the left arrow button.
• When you finish entering characters, press the OK button.
7. If you want to print a network setup report, press the start button. (Otherwise, press the stop
button.)
Your product should now display a blue Wi-Fi symbol on the LCD screen.
Note: If the Wi-Fi symbol is not displayed on the LCD screen as shown above, you may have
selected the wrong network name or entered the password incorrectly. Repeat these steps to try
again.
Parent topic: Wi-Fi Infrastructure Mode Setup
Related tasks
Printing a Network Status Sheet
To Next Page
Loading...
