Need help?Do you have a question about the Epson L358 and is the answer not in the manual?
General| Model | Epson L358 |
|---|---|
| Category | Printer |
| Printer Type | All-in-One |
| Functions | Print, Copy, Scan |
| Print Technology | Inkjet |
| Print Resolution | Up to 5760 x 1440 dpi |
| Print Speed (Black) | 33 ppm |
| Print Speed (Color) | 15 ppm |
| Minimum Ink Droplet Size | 3 picoliters |
| Black Nozzle Configuration | 180 nozzles |
| Scan Resolution | Up to 1200 x 2400 dpi |
| Output Tray Capacity | 30 sheets |
| Connectivity | USB 2.0, Wi-Fi |
| Print Method | Micro Piezo |
| Colour Nozzle Configuration | 59 Nozzles per colour |
| Scanner Type | Flatbed |
| Paper Formats | A4, A5, A6, B5, Letter, Legal, DL |
| Input Tray Capacity | 100 sheets |
| Dimensions | 472 x 300 x 145 mm |
| Photo Print Speed | Approx. 69 seconds per 10 x 15 cm photo (Epson Premium Glossy Photo Paper) |
Details procedures for diagnosing and resolving printer issues, including error codes.
Outlines procedures for dismantling and reassembling printer components and units.
Explains the necessary adjustments and calibration procedures after part replacement.
Provides guidelines for printer cleaning, lubrication, and general upkeep.
Lists fatal error codes, their descriptions, and potential causes for the printer.
Describes disassembly and reassembly procedures using flowchart format.
Details step-by-step procedures for disassembling and reassembling specific printer parts.
Lists adjustments required for specific parts when repaired or replaced, with priority indicated.
Details the Adjustment Program software, its operating environment, and functions.
Details the CR/PF Motor heat protection control adjustment procedure.
Details the Scanner Motor heat protection control adjustment procedure.
Provides procedures for mechanism adjustment and checks, including Platen Gap and Belt Tension.
Details specific points and methods for lubricating various printer mechanical parts.
To Next Page
