EasyManua.ls Logo

Epson LabelWorks LW-Z900FK - User Manual

Epson LabelWorks LW-Z900FK
58 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User’s Guide
Ver.02
Read this document carefully to use this product safely and correctly. If your
product is faulty, please read the included warranty card and contact the store
you purchased it from. If you require further assistance, contact your local
Epson customer support center.
Please also visit the support page of your local Epson website. You can
download the latest version of this User’s Guide from the website.
Portions of this software are copyright 2016 The FreeType Project
(www.freetype.org). All rights reserved.
Content menu
Safety Instructions
Specications
Troubleshooting
Part Names and Functions
Start Here
Cleaning
Initializing the Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
Notation used in this manual
WARNING
Indicates information that, if ignored, could possibly result in serious
personal injury or even death due to incorrect handling.
CAUTION
Indicates information that, if ignored, could possibly result in
personal injury, physical damage, or damage to equipment due to
incorrect handling.
Attention Indicates important information about the printer.
MEMO
Indicates additional information and points which may be useful to
know regarding a topic.
Indicates a place with more detailed information.
Shows an image of the label to be used as an example.
, ,
Indicates the buttons on the printer.
"Name"
Indicates the menu items, messages shown on the display, or the
name of a manual. Example: "On", "Start print?"
©Seiko Epson Corporation 2015-2019. All rights reserved.
M00123200EN

Table of Contents

Questions and Answers

  • F
    foliverAug 19, 2025
    What to do if my Epson Label Maker is overheated?
    • H
      hannah94Sep 12, 2025
      If your Epson Label Maker displays an 'Overheated!' message, this indicates that the printhead is overheated. Turn off the power, remove the tape cartridge, and allow the printer to cool down.
  • J
    Julia RiceAug 21, 2025
    What to do if Epson LabelWorks LW-Z900FK says 'Cover open!'?
    • A
      Ashley KleinAug 21, 2025
      If your Epson Label Maker shows 'Cover open!', it means the top cover is not closed properly. Ensure that you close the top cover completely.
  • P
    Patrick JacksonAug 23, 2025
    How to fix Epson LabelWorks LW-Z900FK Label Maker unable to detect the tape correctly?
    • R
      robinsonmelissaAug 23, 2025
      If your Epson Label Maker is not detecting the tape, make sure the tape cartridge is correctly installed. Also, ensure you are using a compatible cartridge. If the issue persists, gently wipe any dirt off the cartridge with a soft cloth.
  • S
    Stephen HernandezAug 26, 2025
    Why is my Epson LabelWorks LW-Z900FK Label Maker unable to charge Li-ion battery?
    • V
      Victoria Parker DVMAug 26, 2025
      If you're unable to charge the Li-ion battery in your Epson Label Maker, first, check that the battery is correctly installed. Then, connect the AC adapter to the printer to charge the battery.
  • A
    amystokesAug 27, 2025
    What to do if my Epson Label Maker says 'Remove cut tape'?
    • J
      John LeeAug 27, 2025
      If your Epson Label Maker displays 'Remove cut tape', it means there is tape stuck in the tape eject slot. Remove the tape from the slot.
  • B
    Barbara EricksonAug 30, 2025
    What to do if Epson Label Maker says 'Trash at slot'?
    • D
      Deanna ColeAug 30, 2025
      If your Epson Label Maker indicates 'Trash at slot', this means there is tape stuck in the slot. Remove the tape.
  • D
    Dale MorganSep 1, 2025
    What to do if Epson LabelWorks LW-Z900FK displays 'Check battery'?
    • S
      Stephen SteeleSep 1, 2025
      If your Epson Label Maker displays 'Check battery', turn off the power and replace all the batteries with new ones.
  • J
    James BergSep 3, 2025
    What to do if Epson Label Maker says 'QR CODE too big!'?
    • S
      Steven TrevinoSep 3, 2025
      If your Epson Label Maker displays 'QR CODE too big!', try the following: Use a wider tape, reduce the text or cell size, or lower the 'ECC Level'.
  • L
    Linda JacksonSep 5, 2025
    How to fix Epson Label Maker if it is unable to charge Li-ion battery?
    • M
      Melissa PadillaSep 5, 2025
      If your Epson Label Maker is unable to charge the Li-ion battery, ensure the battery is correctly installed. Also, check that the AC adapter and power cable are securely connected to the printer's power socket, the AC adapter connector, and the outlet.
  • D
    Derek StoneSep 7, 2025
    Why Epson Label Maker is unable to detect the tape correctly?
    • A
      Amanda WilliamsSep 7, 2025
      If your Epson Label Maker is unable to detect the tape correctly, consider the following: * Check that the tape cartridge is correctly installed. * Ensure the label for detecting the tape cartridge is clean; if not, wipe it with a soft cloth. * Verify the detection sensor of the printer is clean; if not, wipe it with a soft cloth.

Epson LabelWorks LW-Z900FK Specifications

General IconGeneral
TypeLabel Maker
Print TechnologyThermal transfer
Print Resolution180 dpi
Maximum Print Width24 mm
DisplayLCD
CutterAutomatic
BarcodesYes
Max. Label Length1 m
ConnectivityUSB
Mobile PrintingYes
FontsMultiple
MemoryYes
Power SourceAC adapter
Battery TypeAA batteries

Related product manuals