Page 3 of 10 Last Modified: 3/22/2010
Using the Control Panel Options
The control panel options are located on top of the projector above the lens. All of the
functions of the LCD projector can be controlled from the control panel. The following
list describes the functions of each button of the control panel.
Power:
• To turn on, push the red Power button.
The light will flash for about 30
seconds before the image appears.
• To turn off, push the red Power
button. You will see a confirmation
message. Press Power again to turn
off the projector.
• After turning off the power to the
projector, wait until the fan turns off
before unplugging it. Once the power
light stops flashing, and stays on, it is
safe to unplug the projector.
Help:
Push the Help button on the projector to
get...
• Help for the image
• Help for the sound
• Language selection
Computer/YCbCr:
If the projector is connected to more that
one computer or video source, press Computer/YCbCr to switch between computer
sources and/or video.
Video:
If the projector is connected to more than one video source, press the Video button to
switch between standard video and S-Video.
Menu:
Press Menu to display the 8 items of the menu screen. See Appendix A for a
description of the 8 menu items.
Esc:
When you are finished viewing menu options, press Esc to return to the main menu.
Also, press Esc to leave the menu entirely.
To Next Page
Loading...
Need help?
General