5. Make sure that the paper tension unit is installed and the tractor is installed in the rear push
position. (See “Installing the tractor in the rear push position” on page 22 for instructions on
installation procedure.) Also make sure that the printer cover and front cover are closed.
6. Repack the printer, sheet guide, ribbon cartridge, wing, tractor unit, wire, and power cord (if
necessary) in their original packing materials and place them in the printer’s original box.
LQ-590II/LQ-590IIN/LQ-2090II/LQ-2090IIN User’s Guide
Product Information 161
To Next Page
Loading...
