How to feed continuous paper to standby position on Epson LQ-780 Printer?
Tear off the printed page at the perforation. Then, press the Load/Eject button on the Epson printer to feed the paper to the standby position.
How to remove paper jam from Epson Printer?
Turn off the Epson printer, open the printer cover, and carefully remove any jammed paper or obstructions.
How to fix pale printout on Epson Printer?
Replace the ribbon cartridge in your Epson printer.
How to fix faint printout on Epson Printer?
Replace the ribbon cartridge.
Why is part of my Epson LQ-780 Printer printout missing?
Remove any slack in the ribbon by turning the ribbon-tightening knob, or reinstall the ribbon cartridge.
Why is my Epson LQ-780 printing strange symbols?
Make sure that you use the correct interface cable and that the communications protocol is correct. Also, select the correct character table using your software or the Default Setting mode. Ensure that the correct printer is selected in your application before printing. Verify that your application software is configured correctly for your printer and use your application software to select the font.
Why is all the text printed on the same line by Epson LQ-780?
Turn on the auto line feed setting using the printer’s Default Setting mode so that the Epson printer automatically adds a line feed code to each carriage return.
How to remove extra blank lines between text on Epson LQ-780 Printer?
Turn off the auto line feed setting in the Epson printer’s Default Setting mode or adjust the line space setting in your application software.
How to check interface cable on Epson LQ-780?
Check the interface cable for any damage or twisting. If found, replace the cable with a new one to see if the Epson printer functions correctly.
How to check interface cable connection on Epson LQ-780 Printer?
Check that both ends of the cable connecting the Epson printer and the computer are securely plugged in. If the cable is connected correctly, perform a self-test.
To Next Page
General
