To Next Page
R
Roberto SmithAug 19, 2025
What to do if Epson LQ 300 says paper out?
- DDaniel ThompsonAug 19, 2025
If your Epson printer is showing a 'Paper Out' error, reload paper into the printer. Then, press the PAUSE button to turn off the PAUSE light.
What to do if Epson LQ 300 says paper out?
If your Epson printer is showing a 'Paper Out' error, reload paper into the printer. Then, press the PAUSE button to turn off the PAUSE light.
Why printed image from Epson LQ 300 is light or faint?
To address a light or faint printed image on your Epson printer, first, turn off the PAUSE light, then hold down the ALT button and press the PAUSE button for two seconds to clean the print head. If the issue persists, replace the ink cartridge with a new one.
How to fix missing dots in print on Epson Printer?
If dots are missing in printed characters or graphics from your Epson printer, turn the PAUSE light off. Next, hold down the ALT button and press the PAUSE button for two seconds to clean the print head.
How to stop extra blank lines on Epson LQ 300?
If your Epson printer prints an extra blank line between each text line, set auto line feed to off in the default-setting mode so that two line-feed signals are not sent.
What to do if paper does not fully eject from Epson LQ 300?
If the paper does not fully eject from your Epson printer, use the LOAD/EJECT button to eject the page.
What to do if my Epson LQ 300 has power supply issues?
First, ensure the power cord is securely plugged into the electrical outlet. Next, check that the power switch is correctly pressed down to turn the Epson printer on. If the outlet is controlled by a switch or timer, try a different outlet. Finally, test the outlet with another electrical device to confirm it's working.
How to fix carriage error on Epson LQ 300 Printer?
If your Epson printer displays a carriage error, turn off the printer and wait a few seconds. Then, turn it back on.
What to do if Epson Printer sounds like printing but nothing prints?
If your Epson printer sounds like it's printing but nothing comes out, turn the PAUSE light off. Then, hold down the ALT button and press the PAUSE button for two seconds to clean the print head.
What to do when DATA and PAUSE lights flash on Epson Printer?
If printing stops and the DATA and PAUSE lights are flashing on your Epson printer, turn off the printer and then turn it back on after a few seconds.
What to do if PAPER OUT and PAUSE lights are on Epson LQ 300 Printer?
If your Epson printer is not printing and the PAPER OUT and PAUSE lights are on, load paper into the paper feeder or the manual feed slot. Then, press the PAUSE button to turn off the PAUSE light.
General| Print Method | Impact dot matrix |
|---|---|
| Print Resolution | 360 x 360 dpi |
| Number of Pins | 24-pin |
| Interface | Parallel |
| Paper Handling | Friction feed, tractor feed |
| Copy Capability | Original + 4 copies |
| Noise Level | 55 dB(A) |
| Paper Size | continuous paper (width: 101.6 mm to 254 mm) |
Steps for unpacking the printer and choosing a suitable location.
Instructions for assembling the printer, installing the ribbon, and connecting power.
Guide for connecting computer interfaces and configuring printer software.
Explanation of printer settings and instructions for installing optional accessories.
Troubleshooting steps for power supply, printing, and general operational issues.
