Epson LQ 300 Manual

EPSON LQ-300
/
switch
Character fonts:
n----7 paper supports
amsuifo 0
Couriers 0
Printer Specifications
Printing
Print method:
24-pin impact dot matrix
Print speed:
I
12
I
240
J
is 300
10 67
12
60
Le4terQuatity
1
l
I
15
I
100
I
The paper-thidoress lever posltbn or an oveftmmd Pttnt head may
slowdcwnthephtiarg~.
Printing
direction:
Bidirectional logic-seeking for text and
graphics. Unidirectional for graphics can
be selected with the Printer setting mode
or a software command.
Line spacing
l/6 inch, l/8 inch, or programmable in
increments of l/360 inch.
Paper feed speed 80 ms per l/6-inch line; 3.3 inches/second
with continuous feed.
Printable
columns:
80 characters at 10 cpi
96 characters at 12
cpi
120 characters at 15 cpi
137 characters at 17 cpi
160 characters at 20 cpi
Input buffer:
Download
memory:
8KB
10KB
Character tables:
Character sets:
EPSON Roman
EPSON Sans Serif
EPSON Courier
EPSON Script
Draft condensed
Roman-T
Sans Serif-H
EPSON Prestige
Draft
One italic and 8 graphic character tables.
(15 graphic character tables are available
in certain areas.)
14 international character sets and 1 legal
character set
Color printing (optional):
Method
Print ribbon shifting
Ribbon color
Black, Magenta, Cyan, and Yellow
Paper
Single sheets (CSF):
Width:
182 to 216 mm (7.2 to 8.5 inches)
Length:
210 to 364 mm (8.3 to 14.3 inches)
Thickness:
0.07 to 0.12 mm (0.0028 to 0.0047 inch)
Weight:
64 to 91 g/m2 (18 to 24 lb)
Cl Use 90 g/m2 (24 lb) paper only under
normal temperature and humidity
conditions.
Single sheets (manual insertion):
Width:
148 to 257 mm (5.8 to 10.1 inches)
Length:
Max. 364 mm (14.3 inches)
Thickness:
0.065 to 0.14 mm (0.0025 to 0.0055 inch)
Weight:
52.3 to 90 g/m2 (14 to 24 lb) paper under
normal conditions.
0 Use 90 g/m2 (24 lb) paper only under
normal temperature and humidity
conditions.
Continuous paper:
Width:
101 to 254 mm (4 to 10 inches)
Copies:
Four sheets (one original plus three copies)
Thickness:
0.065 to 0.32 mm (0.0025 to 0.012 inch) total
Weight:
52.3 to 82 g/m2 (14 to 22 lb) for one sheet
40 to 58.2 g/m2 (12 to 15 lb) per sheet in
multi-part forms
a
Q
a
Use only two- or three-part carbonless
multi-part forms fed with the tractor.
When using side-crimped multi-part
forms, raise the paper guide to keep the
printing position accurate.
When using the push tractor, the
printing position for the last page may
not be accurate because the page comes
off the tractor.
Dot Matrix Printers
10/2/94
EPSON LQ-300-1

Epson LQ 300 Specifications

General

Print Method	Impact dot matrix
Print Resolution	360 x 360 dpi
Number of Pins	24-pin
Interface	Parallel
Paper Handling	Friction feed, tractor feed
Copy Capability	Original + 4 copies
Noise Level	55 dB(A)
Paper Size	continuous paper (width: 101.6 mm to 254 mm)