Epson LQ 300 - Page 2

EPSON LQ-300
Note:
Use recycled paper under normal conditions only. If ribbon
consumption or paper jamming increase, use a higher grade of
paper
Labels:
size:
Thickness:
Weight:
Envelopes:
size:
ThiCkMSS:
Weight
101 to 254 mm (4.0 to 10.0 inches) width
for backing sheet
63.5 x 23.8 mm (2.50 x 0.94 inches)
minimum for a label
0.07 to 0.09 mm (0.0028 to 0.0031 inches)
for backing sheet
0.16 to 0.19 mm (0.0063 to 0.0075 inches)
total
68 g/m2 (17 lb) for label only
0 Use only continuous type labels and
usethemonlywiththetractor.
P Use labels only under normal
temperatureand humidity conditions.
No.6 166x92mm (6.5~3.6inches)
No. 10 240 x 104 mm (9.5 x 4.1 inches)
0.16 to 0.52 mm (0.0063 to 0.0197 inches)
45 to 91 g/m2 (12 to 24 lb)
0 Use envelopes only under normal
temperature and humidity conditions.
Printable area:
Single sheets and envelopes
A Theminlnwmtapmat$n&55mm(02inch).
6 The minillmnn bit margin is 3 mm (0.12 inch).
Theminimomti@tmarghis3mm(0.12inch).
HtmBver,the- prlntrblew#his203mm(8inches).
C The minimum bottom matgln is 9.0 mm (0.35 inch).
Continuous paper
A
B
B
A TheminimumtopandbottommPrginsaboveandbekwthepertoration~
9.0 mn (0.35 inch).
B Themlnimuml~aMJrlgMmarghs~13mm(0.51inch).
The maximum printaWe wklth is 203 mm (6.0 inches).
Mechanical
Paper-feed
Friction
methods:
Push tractor
Pull tractor
Push-pull tractor (with optional pull
tractor unit C800301) .
Cut-sheet feeder (option C806371)
Ribbon:
MTBF:
4ooopower~hours
Print head
200 million strokes/wire (black)
life:
100 million strokes/wire (color and film)
l3iXbdOnS
Width
366 mm (14.4 inches)
and weight:
Depth:
275 mm (10.8 inches)
(Without
Height:
141 mm (5.6 inches)
tractor unit)
weight:
Approx. 4.3 kg (9.5 lb)
Electrical
Rated voltage
AC 120 V
Input voltage
AC 103.5 to 132 V
range
Rated
50 to 60 Hz
frequency
range
Input
49.5 to 60.5 Hz
frequency
range
Ratedcurrent 1.1 A
Power
Approx. 30 W (during self-test printing in
consumption
Draft mode at 10 cpi)
EPSON LQ-300-2
10/2/94
Dot Matrix Printers