Color Upgrade Kit
The optional Color Upgrade Kit (C83211
✽
) includes a color
ribbon cartridge and a motor unit. Here’s how to install the kit:
1. Turn off the printer and remove the printer cover. If the
original ribbon cartridge is installed, remove it. Then slide
the connector cover on the printer and pull it out as shown.
2. Install the motor unit in the right hand corner of the printer,
with the gear facing the center of the printer. Push it down
firmly to fit the metal pins into the slots.
2-24
2-25
R
Blackberry REV.D
A5 size Chapter 2
96/04/08 pass 1
Using the Printer
2-35
To Next Page
Loading...
