Epson LQ 300 - Using Non-Windows Software

8. Click the
OK
button.
9. Highlight
EPSON LQ-300
(or the printer you added) and click
the button labeled
Set As Default Printer
.
10. Click the
Close
button.
Using non-Windows software
See your software documentation for installation instructions,
and choose
LQ-300
when a list of printers appears. If this is not
available, choose the first available printer from the following
list. If you plan to use color, you must choose either
ActionPrinter 3260
,
LQ-150
,
LQ-860
, or
LQ-2550
. The other
printers cannot use color.
ActionPrinter 3260 LQ-870
LQ-150 ActionPrinter 3250
LQ-860 Any LQ printer
LQ-2550 EPSON printer
LQ-570+
Stylus 800
If your software does not list the LQ-300, you may want to
contact the software manufacturer for an update.
L
Blackberry REV.E
A5 size Chapter 1
96/04/08 pass 1
1-18
Setting Up the Printer