Paper Handling
Single sheets do not feed properly
Paper does not feed.
Continuous paper may be left in the printer. Remove the
continuous paper. Set the paper-release lever to the single-
sheet position. Insert a new sheet.
Move the paper a little to the left.
Paper feeding is crooked or the paper jams.
Turn off the printer and pull out the paper. Insert a new sheet
straight into the paper guide. Be sure you’re using the right
type of paper. See the paper specifications in the Appendix.
Check to see that the printer cover is closed.
Paper does not eject completely.
Use the
LF/FF
button to eject the page.
Make sure the printer cover is closed.
The paper may be too long. Use paper that is within the
specified range. See the paper specifications in the Appendix.
R
Blackberry REV.D
A5 size Chapter 3
95/05/08 pass 0
Troubleshooting
3-7
To Next Page
Loading...
