Printing in the push tractor position
When using the push tractor, it is a good idea to set the
auto tear off feature in the Printer Setting mode to On. See
“ Changing the printer settings” on page 2-25. Here’s how to
load continuous paper using the push tractor:
1. Make sure the printer is turned off. Remove the paper guide
and place the paper-release lever in the continuous paper
position.
2. Release the sprocket units by pulling the sprocket locks
forward.
2-04
2-05
L
Blackberry REV.D
A5 size Chapter 2
96/04/08 pass 1
2-8
Using the Printer
To Next Page
Loading...
