Epson MOVERIO BT-300 Simple Steps

Turn the BT-300 on and connect to a Wi-Fi network.
Make sure the BT-300 has the latest rmware installed.
(Apps > Settings > About device > System updates)
Create a Moverio Apps Market account via the pre-installed
app or using a PC on our website.
(https://moverio.epson.com/jsp/pc/pc_login.jsp)
Download and install the DJI GO or DJI GO 4 apps from the
Moverio Apps Market.
Turn on your DJI drone and DJI controller. Remove any cables
connected to your DJI controller and connect the BT-300 handset
to your DJI controller using the micro USB cable provided.
Open the DJI GO or DJI GO 4 app (if prompted,
select ‘Just Once’) and select ‘Go Fly’.
You are now ready to y!
Thank you for purchasing your
Moverio BT-300.
Here are 7 simple steps to get started with your DJI drone.
1
4
2
5
3
6
7
Note: The DJI GO and DJI GO 4 apps support different drone models.
Please check compatibility before downloading.
DJI

Epson MOVERIO BT-300 Specifications

General

Type	Smart Glasses
Field of View	23 degrees
Contrast Ratio	100, 000:1
Processor	Intel Atom x5
Operating System	Android 5.1
RAM	2 GB
Internal Storage	16 GB
Camera	5 MP
Battery Life	6 hours
Display Type	OLED
Display Technology	OLED
Resolution	1280 x 720
Wireless Connectivity	Wi-Fi, Bluetooth
Sensors	Accelerometer, Gyroscope, Magnetometer