How to fix no image on Epson Smart Glasses?
If you cannot see an image on your Epson Smart Glasses, try these steps: First, unplug the micro-USB power supply cable or the USB Type-C cable, wait briefly, and then plug it back in. Also, ensure that the connected device supports video output via USB Type-C. Finally, try holding down the [ ] key and the [ ] button simultaneously to switch between Mode 1 and Mode 2.
Why can't I adjust brightness on Epson Moverio BT-35E?
If the screen brightness of your Epson Smart Glasses cannot be adjusted, it might be because the device is overheating. To protect itself, the glasses may automatically decrease the image brightness. You can check if the brightness has been limited.
What to do if I cannot hear audio on Epson Smart Glasses?
If you cannot hear audio through your Epson Smart Glasses, make sure the earphones are securely connected. Also, verify that the volume is set to an audible level and that the connected device is outputting audio. Keep in mind that some standard earphones, especially those with a switch, may not be fully compatible.
General| Field of View | 23 degrees |
|---|---|
| Contrast Ratio | 100, 000:1 |
| Battery Life | Up to 6 hours |
| Sensors | Accelerometer, Gyroscope |
| Display Type | Si-OLED |
| Resolution | 1280 x 720 (per eye) |
| Audio | Built-in speakers |
| Connectivity | HDMI |
| Weight | 119 grams |
| Type | Smart Glasses |
| Color Depth | 16.7 million colors |
| Operating System | Android |
| Compatibility | Android |
To Next Page
