Maintenance
Cleaning the headset
• If you can see marks in the image or if the image is hazy,
check that there is no dirt, dust, fingerprints, and so on,
on the lenses.
If there is dust or dirt on the lenses, wipe them carefully
with a soft cloth.
When wiping the lenses, do not use lens cleaning
liquids or organic solvents.
• If the camera is dirty, wipe it carefully with a soft cloth.
• If any parts other than the lens or camera are dirty, wipe
them with a wet tissue.
Storing the headset
• When storing the headset, place it in the packaging that
it came in or the dedicated carrying case.
• When placing the headset, make sure it is placed horizon-
tally so that it does not touch against hard objects. If the
headset is placed with the lens facing down and the lens
touches hard objects, the lens could be damaged.
Cleaning the connector ports
• If the connectors on the interface unit are dirty or if there
are foreign objects stuck to them, they may not work cor-
rectly. Wipe away any dirt with a dry cloth or cotton swab
at least once every three months.
Caution
• Do not damage the connector ports with your finger or
a hard object.
• Do not expose the connector ports to water. When clean-
ing the connector ports, use a dry cloth or a cotton swab.
To Next Page
