Epson Moverio BT-35E - List of Safety Symbols

General Notes
36
List of Safety Symbols
The following table lists the meaning of the safety sym-
bols labeled on the equipment.
No. Symbol mark
Approved
standards
Meaning
A
IEC60417
No. 5007
"ON" (power)
To indicate connection to the
mains.
B
IEC60417
No. 5008
"OFF" (power)
To indicate disconnection from
the mains.
C
IEC60417
No. 5009
Stand-by
To identify the switch or switch
position by means of which part
of the equipment is switched on
in order to bring it into the stand-
by condition.
D
ISO7000
No. 0434B
IEC3864-B3.1
Caution
To identify general caution when
using the product.
E
IEC60417
No. 6042
ISO3864-B3.6
Caution, risk of electric shock
To identify equipment that has risk
of electric shock.
No. Symbol mark
Approved
standards
Meaning
F
IEC60417
No. 5957
For indoor use only
To identify electrical equipment
designed primarily for indoor use.
G
IEC60417
No. 5926
Polarity of d.c. power connector
To identify the positive and nega-
tive connections (the polarity) on
a piece of equipment to which a
d.c. power supply may be con-
nected.
H
IEC60417
No. 5017
Earth
To identify an earth (ground)
terminal.
I
IEC60417
No. 5032
Alternating current
To indicate on the rating plate that
the equipment is suitable for al-
ternating current only; to identify
relevant terminals.
J
IEC60417
No. 5031
Direct current
To indicate on the rating plate
that the equipment is suitable
for direct current only; to identify
relevant terminals.