Firmware Update Procedure:
Download the file epson12939.exe for Windows users or epson12940.dmg for Mac users
from the Epson website (www.epson.com). Follow the on-screen instructions to download and
extract the file onto your computer.
To verify the current firmware version on your viewer:
a) Power on the unit
b) Select Settings from the Home screen and press OK.
c) Select Device Information and use the 4 way ring to select the firmware version menu.
Press OK.
If you see earlier versions; such as the following versions:
01.29.6838-0108-0200-0112
01.30.7099.0108-0200-0112
01.31.7104-0108-0200-0112
01.57.7431-0110-0107-0112 then proceed to the next section.
Steps:
1. Install a blank memory card into a memory card reader/writer and copy the
“PSV5FIRM” folder (including all the files in the folder) to the root directory of the
memory card.
2. Verify that the battery is installed in the P-6000 or P-7000 viewer.
3. Connect the AC adapter to the viewer, but do not power it on.
4. After the firmware file has been copied to the memory card, insert the CompactFlash or
SD memory card into the viewer.
5. Press and hold down the “OK” and keys while sliding the “POWER” switch as
shown below.
Page 3 of 4
PSB.2009.06.003
To Next Page
Loading...
Need help?
General
