Page 2 of 4
PSB.2009.09.002
P-6000/P-7000 Firmware Update Instructions:
Note: Before starting the firmware update process, confirm that there are no files on the
memory card.
To download and install the new firmware file, you will need the following:
• Windows-based PC or Macintosh computer with Internet access
• Operating Systems: Windows 2000/XP Home/Pro/XP/XP Pro x64 Edition/Vista;
Macintosh OS 10.2.8 to 10.5.x
• Memory card reader/writer
• Formatted Compact Flash (16MB to 8GB) or SD memory card (16MB to 2GB); no size
limit on an SDHC card---Note: there must be no data on the card
• P-6000/P-7000 battery installed (fully-charged battery recommended)
• AC adapter – must be plugged in to a wall socket and connected to the viewer before
the firmware update can be performed
Firmware Update Procedure:
Download the file epson13380.exe for Windows users or epson13381.dmg for Mac users
from the Epson website (www.epson.com). Follow the on-screen instructions to download and
extract the file onto your computer.
To verify the current firmware version on your viewer:
a) Power on the unit
b) Select Settings from the Home screen and press OK.
c) Select Device Information and use the 4 way ring to select the firmware version menu.
Press OK.
If you have firmware version 01.57.7431-0110-0107-0112 installed on your viewer then
proceed to the next section. If you have any of the versions listed below, you must
update to version 01.57.7431-0110-0107-0112 first before updating to 1.71. See bulletin
PSB.2009.06.003 for more information.
01.29.6838-0108-0200-0112
01.30.7099.0108-0200-0112
01.31.7104-0108-0200-0112
To Next Page
Loading...
Need help?
General
