Epson PowerLite 1915 User Manual (English)

Other manuals for Epson PowerLite 1915

Network Guide95 pages

Declaration Of Conformity4 pages

Quick Setup Guide4 pages

Brochure & Specs4 pages

Maintenance Guide3 pages

Update Instructions4 pages

Questions and Answers:

E
Emily GlassAug 25, 2025
Why is there no audio from my Epson PowerLite 1915 Projector when connecting with EasyMP Network Projection?
- K
  Kenneth MartinAug 25, 2025
  If you're not getting audio from the projector when connecting with EasyMP Network Projection: * Ensure that only one projector is connected to the computer, as audio can only be transferred to one projector. * Check that audio is set to output from the computer in Set Options. Select 'Output audio from the projector' on the Set options Audio Output tab.
T
tanya90Aug 26, 2025
Why applications no longer display from the computer when the multi-screen display function is used on my Epson PowerLite 1915 Projector?
- L
  Lori BlevinsAug 27, 2025
  If applications no longer display from the computer when the multi-screen display function is used, and EPSON Virtual Display is installed, set EPSON Virtual Display to 'Off' in 'Screen properties', as another application might be running on the virtual display.
L
Luke EllisAug 28, 2025
Why the Slide Show does not display when the multi-screen display function is used on my Epson PowerLite 1915?
- S
  Scott BrownAug 28, 2025
  If the Slide Show does not display when the multi-screen display function is used, and you are using PowerPoint 2002 or an earlier version, use PowerPoint 2003 or later to set and use two or more virtual displays.
C
Colleen JuarezAug 30, 2025
Why is the mouse cursor not displayed on the computer screen of my Epson Projector?
- D
  Douglas ReedAug 30, 2025
  If the mouse cursor is not displayed on the computer screen, it might have been moved onto the virtual display, assuming EPSON Virtual Display is installed.
C
cory05Sep 1, 2025
Why can't I monitor or control my Epson Software projector?
- G
  Gabriel HowellSep 1, 2025
  If Epson Software EasyMP Monitor cannot monitor or control the projector, first ensure the network cable is correctly connected; if not, reconnect it. Then, verify the settings in the Network configuration menu. Also, confirm that EasyMP Monitor is correctly installed on your computer by uninstalling and reinstalling it. Ensure all projectors are registered. Finally, the projector's Standby Mode should be set to Communication On (or Network On), or Network Monitoring should be set to On in the configuration menu to enable monitoring and control via EasyMP Monitor in standby mode.
C
Christopher GarciaSep 3, 2025
What to do if Epson Software doesn't send e-mail messages when a problem occurs?
- J
  Joseph AlexanderSep 3, 2025
  If you are not receiving e-mail notifications from Epson Software when a problem occurs, check that the SMTP server IP address, Port Number, and Recipient mail address are correctly configured. Also, ensure the projector's Standby Mode is set to Communication On (or Network On) or Network Monitoring is set to On in the configuration menu. If the projector has momentarily stopped working due to a critical problem, it won't be able to send e-mails; in this case, and if the projector cannot be reset after checking, contact Epson. Finally, verify that the projector is receiving power and that the circuit breaker hasn't tripped.
J
Julie MartinezSep 5, 2025
What to do if PowerPoint Slide Show does not start when connected using EasyMP Network Projection on my Epson PowerLite 1915 Projector?
- R
  robin62Sep 5, 2025
  If a PowerPoint Slide Show does not start when connected using EasyMP Network Projection, make sure you close PowerPoint first before connecting with EasyMP Network Projection.
J
Jordan ChavezSep 8, 2025
What to do if the screen does not refresh in an Office application when connected using EasyMP Network Projection on my Epson PowerLite 1915?
- R
  Robert SampsonSep 8, 2025
  If the screen does not refresh in an Office application when connected using EasyMP Network Projection, the screen is updated when you stop moving the mouse cursor.
A
Ashley WallsSep 10, 2025
Why cannot I play back or display files in PC Free on my Epson Projector?
- E
  Emily SnyderSep 10, 2025
  If you cannot play back or display files in PC Free: * The file format may not be supported by PC Free. Depending on the file format, some files cannot be played back in PC Free. * The USB storage device may incorporate security functions. USB storage devices that incorporate security functions sometimes cannot be used with this projector. * The USB hard disk or USB card reader may not be compatible. Some commercially available USB hard disks or USB card readers may not be compatible.
A
Alicia LopezSep 12, 2025
What to do if network settings are not restored after disconnecting from EasyMP Network Projection on my Epson PowerLite 1915?