Making Detailed Adjustments 43
■ Tracking
Adjust the tracking to eliminate vertical bands. It is easiest to
adjust the tracking when the image contains a lot of fine detail
(such as black text on a white background).
■ Sync.
Adjust the synchronization to eliminate blurriness. For best results,
make sure the tracking is properly adjusted first.
Selecting Memory Settings and Resetting the
Projector
Your projector comes with 10 memory locations where you can save customized settings to
obtain the best picture quality for each of your video inputs.
Selecting Memory Settings
You can easily recall the memory settings by using the
memory button on the remote control.
1. Press the
Memory button on the remote control.
2. Select
Load Memory.
3. Use the arrow buttons to select the desired setting, then
press the
Enter button.
After a moment, the image appears on the screen using
the retrieved settings. Certain settings may not be
applied, depending on the input signal.
Signal > Tracking
Signal > Sync.
Memory
button
To Next Page
Loading...
Need help?
General