Epson PowerLite 85 User Manual

INSTALLATION
HANDBOOK
Remote Control Information
Epson PowerLite 85/825/826W
Using the Remote Control
Follow these tips for using the remote control:
Point the remote control at the front of the projector or at the
screen.
Stand within 20 feet of the projector.
Avoid using the remote under bright uorescent lamps or in
direct sunlight, or the projector may not respond properly.
Replacing the Batteries
Replace the batteries as described below:
1. Turn the remote control over.
2. Press the tab on the battery cover
to open it.
3. Install two AA batteries,
inserting the
+ and – ends
as shown.
4. Close the cover, pressing it down
until it snaps into place.
note
If a button is pressed longer
than 30 seconds, the remote
control stops operating to
conserve power. When you
release the button, normal
operation resumes.
caution
When replacing batteries,
take the following
precautions:
Replace the batteries as
soon as they run out. If the
batteries leak, wipe away
battery uid with a soft
cloth. If uid gets on your
hands, wash immediately.
Do not expose batteries to
heat or ame.
Dispose of used batteries
according to local
regulations.
Remove the batteries if
you won’t be using the
projector for a long period of
time.
1

Epson PowerLite 85 Specifications

General

Number of colors	16.78 million colors
Projection distance	- m
Projection technology	LCD
Contrast ratio (typical)	2000:1
Screen size compatibility	30 - 300 \
Projector native resolution	XGA (1024x768)
Resolution	1600 x 1200 pixels
Aspect ratio	4:3
RS-232 ports	1
Dimensions (WxDxH)	327 x 95 x 250 mm
Power requirements	100 - 240 V, 50/60 Hz
Connectivity technology	Wired
Lamp type	UHE
Lamp power	200 W
Light source type	Lamp
Service life of light source	5000 h
Service life of light source (economic mode)	6000 h
Focus	Manual
Focal length range	18.2 - 29.2 mm
RMS rated power	10 W
DVI port	No
HDMI ports quantity	0
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	-
Sustainability certificates	ENERGY STAR
Power consumption (standby)	9.4 W
Power consumption (typical)	289 W
Cable lock slot type	Kensington
Operating temperature (T-T)	5 - 35 °C

Weight and Dimensions

Weight	3150 g

Summary

Controlling the Picture and Sound

Switching Between Picture Sources

Explains how to select the input source for the projector using the remote control.

Turning Off the Picture and Sound

Stopping Action

Details how to pause the video or computer image using the remote's Freeze button.

Zooming Part of Your Image

Controlling the Volume

Instructions on adjusting audio volume using dedicated remote buttons or the menu system.

Adjusting the Aspect Ratio

When Connected to Video Equipment

Guidance on setting projector aspect ratio to match video sources like DVD players.

Adjusting the Color Mode

Operating Your Computer with the Remote Control

Highlighting Your Presentation

Using the Pointer Tool

Instructions on activating and using the pointer feature on the remote control.

Customizing the Pointer Tool

Steps to change the appearance or shape of the on-screen pointer.