2. Connect HDMI cables to your video devices and to the HDMI input ports on the side and back of the
WirelessHD transmitter.
Note: You can connect an MHL-compatible smartphone or tablet to the HDMI 5 / MHL (IN) port on
the WirelessHD Transmitter.
3. To use the WirelessHD transmitter as a pass-through device to a television or other display, connect
an HDMI cable to the display device and to the HDMI output port on the back of the transmitter.
Parent topic: Using WirelessHD
Viewing WirelessHD Content
Turn on the video equipment or computer you want to use before you turn on the WirelessHD transmitter
and projector.
1. Turn on the power switch on the side of the transmitter.
2. Turn on the projector.
68
To Next Page
Loading...
