Playing discs 29
After you connect headphones, you no longer hear any sound from the built-in speakers.
However, you can still adjust the volume to the headphones using the projector’s volume
controls on the control panel or remote control.
Warning: Make sure the volume is not set too high, especially when you first plug in the
headphones. Listening to high volume sounds over an extended period can damage your hearing.
Sudden high volume can also damage your hearing or your headphones.
Do not look into the lens, and do not allow children or pets to look into the lens. The bright light may
affect your vision.
Connecting a Microphone
Connect a microphone as shown below:
You can adjust the volume using the projector’s volume controls on the control panel or
remote control. If the microphone level is too low, you can adjust it by pressing the
button on the remote control or through the Option menu (see page 47).
To Next Page
Loading...