Doing More with Your Projector 41
Changing the Play Sequence (Program Play)
You can create your own program for playing tracks on a music CD or chapters and titles on
a DVD. Programs are saved for up to 10 discs, even after you change the CD or DVD.
1. Press (make sure the toggle switch on the remote control is set
to the
Func- position). You see the program screen, which allows
you to set a playback sequence:
2. Set the toggle switch on the remote control to the
-Num position.
3. Use the numeric buttons to set the program order (up to 99 chapters, titles, or tracks).
■ Press , , , or to move the cursor.
■ If a disc has more than 10 chapters or tracks, press or to display the next or
previous page. Or, select
Next or Prev on the screen and press .
■ To delete a track or chapter you have entered, select it and press .
■ To close the program screen, select Exit on the screen and press .
4. To begin playing your programmed sequence, select
Start on the screen and press .
5. Set the toggle switch on the remote control back to the
Func- position.
6. To cancel the program, press .
7. To resume normal playback, stop play and press .
To Next Page
Loading...