118 Managing Projectors
When the selected problem or warning occurs, an e-mail message is
sent to the specified notification addresses. The subject line of the
e-mail is
EPSON Projector. The e-mail includes the following
information:
■ Line 1: The name of the projector where the problem has
occurred
■ Line 2: The IP address of the projector where the problem has
occurred
■ Line 3: Details of the problem
PowerLite Pro G5200WNL
1. Press the Menu button on the remote control, select the
Network menu, then press Enter. You see the following screen:
2. Choose
Mail, then press Enter.
3. Highlight
On to receive e-mail notifications, then press Enter.
4. Enter the IP address for the
SMTP server for the projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used: 127.x.x.x,
224.0.0.0 to 255.255.255.255 (where x is a number from 0 to
255).
5. Enter the SMTP server’s port number. The default value is 25.
You can enter a numeric value from 1 to 65535.
To Next Page
Loading...
