80
Note the following when using this feature:
• This feature is not supported with the ELPLX02 or ELPLX02W lens.
• This feature is not supported when performing the following functions: Tiling, Tiling Assist, Screen
Matching, Color Calibration, Lens Calibration, Message Broadcasting in the Epson Projector
Management software.
• Using this feature cancels the following functions: Split Screen, Shutter, on-screen display (when the
message is hidden).
1. Hold down the Freeze button on the remote control for about five seconds or until you see this
menu.
2. Make sure the Remote Camera Access setting is set to Off, then exit the menu.
3. Press the Menu button.
4. Select the Network menu and press Enter.
To Next Page
Loading...
