26 Print With Adobe Photoshop
3. Select North America Prepress 2 from the Settings menu to set Adobe RGB
(1998) as the RGB working space and activate profile messages.
4. Click
OK.
Follow the steps in the next section to open the photo you want to print and
assign a profile to it.
Assign a Profile to Your Photo
1. Open the photo you want to print.
2. If you see an Embedded Profile Mismatch message, select
Use the
embedded profile
and click OK.
If you see a Missing Profile message, select
Assign working RGB: Adobe
RGB (1998)
and click OK. When your image appears, evaluate the color
balance and contrast as displayed on your monitor. If it looks incorrect, select
Edit > Assign Profile.
Select one of the following as the
Profile setting:
■ A different RGB working space (or Profile), such as ColorMatch RGB or
sRGB IEC61966-2.1
■ A scanner profile for your scanner
■ A camera profile for your digital camera
Also click the
Preview box so you can see the effects of your profile choice on
the screen.
Tip:
This is most effective when your monitor is calibrated using a hardware device
such as the X-Rite i1Display 2.
3. Click OK.
4. Select
File, then select Page Setup.
To Next Page
Loading...
