Pass Mode Minimum Top Margin
600x600dpi -4.0pass HD 5mm (0.2in.)
600x1200dpi -6.0pass 6mm (0.24in.)
600x1200dpi -6.0pass HD 6mm (0.24in.)
600x1200dpi -8.0pass 6mm (0.24in.)
600x1200dpi -8.0pass HD 6mm (0.24in.)
SC-F6400H Series
Pass Mode Minimum Top Margin
300x600dpi -2.1pass 5mm (0.2in.)
300x600dpi -3.5pass 5mm (0.2in.)
600x600dpi -4.7pass 5mm (0.2in.)
600x600dpi -6.3pass 6mm (0.24in.)
600x600dpi -6.3pass HD 6mm (0.24in.)
600x600dpi -8.5pass 34mm (1.34in.)
600x600dpi -8.5pass HD 34mm (1.34in.)
600x1200dpi -12.9pass 6mm (0.24in.)
600x1200dpi -12.9pass HD 6mm (0.24in.)
Note:
When Width Detection is set to Off, make sure that the set value does not exceed the width of the loaded media. If the
set value is larger than the media width, the printer may print beyond the left or right edges of the media. Ink used
outside the edges of the media will stain the inside of the printer.
SC-F6400 Series/SC-F6400H Series User's Guide
Basic Operations
50
To Next Page
Loading...
Need help?
General