To Next Page
J
jcrawfordAug 5, 2025
How to fix Epson SC-F3000 Printer if the printed surface is soiled?
- HHeather GarciaAug 5, 2025
If the printed surface is soiled when using your Epson printer, start by checking if the suction cap is clean. The printed surface may get dirty from dripping ink if there are ink lumps or lint around the suction cap; if needed, clean the suction cap. If you are printing on T-shirts, ensure that the T-shirt has been completely dried after pre-treatment, because insufficient heat press processing or accumulated moisture can cause soiling. Also, clean around the print head if the issue persists after cap cleaning, as fibers like lint may have accumulated around the print head nozzles.
General
