Epson SC-F3000 Series

When to perform Component to be cleaned
If a platen without a grip pad is soiled C Clean the platen without a grip pad
U “Cleaning the Platen Without a Grip Pad” on page 88
❏ When It is time to clean the Suction
Cap. appears on the control panel
screen
*
❏ When there are ink stains on the
printing surface of the T-shirt
D Suction cap
U “Cleaning the Suction Cap” on page 85
You can check the procedure in a video on YouTube.
Epson Video Manuals
* If this message is displayed frequently, contact your dealer or Epson support.
Locations of Consumables and Replacement Timing
When to perform Component to be replaced
When a prepare and replacement
message is displayed on the control panel
screen
AAir Filter
U “Replacing the Air Filters” on page 98
B Waste Ink Bottle
U “Disposing of Waste Ink” on page 92
DAnti-Drying Caps
U “Replacing the Anti-Drying Caps” on page 96
E Wiper Unit, F Flushing Pad
U “Replacing the Head Cleaning Set” on page 94
SC-F3000 Series User's Guide
Maintenance
77