Epson SC-F3000 Series

Setting up the Printer After
Moving
Follow the steps below to use the printer after moving.
A
Confirm that the location is suitable for setting
up the printer, lock the casters on the printer and
ink unit, and then lower the adjustable feet to
stabilize the printer.
U Setup Guide (booklet)
If you do not have the Setup Guide on hand, select
and refer to the model of your printer from
http://epson.sn.
B
Install all the items that were removed, such as
the waste ink bottle.
U Setup Guide (booklet)
C
Connect the power plug to an electrical outlet,
and then turn on the printer.
U Setup Guide (booklet)
D
Perform a nozzle check and confirm that there
are no clogged nozzles.
U “Checking for clogged nozzles” on
page 100
Transporting the Printer
Before transporting the printer, contact your dealer or
Epson Support.
U “Where To Get Help” on page 149
SC-F3000 Series User's Guide
Appendix
139