Epson SC-F3000 Series

Specifications Table
Printer Specifications
Printing method On-demand ink jet
Nozzle configuration
White ink mode White: 800 nozzles × 10 rows
Color: 800 nozzles × 2 rows × 4
colors (Black, Cyan, Magenta,
Yellow)
Color ink mode Color: 800 nozzles × 2 rows × 4
colors (Black, Cyan, Magenta,
Yellow)
Resolution (maxi‐
mum)
1200 × 1200 dpi
Control code ESC/P raster (undisclosed
command)
Platen feed meth‐
od
Conveyor belt
Built-in memory 4 GB
Interface 2 ports of Hi-Speed
USB-Compatible with the USB 2.0
Specification (Rear: for connecting
with a computer, Front: for a USB
memory device)
Ethernet 1000Base-T/100Base-TX/
10Base-T
*
Rated voltage
(printer, ink unit)
AC100-240 V
Rated frequency
(printer, ink unit)
50/60 Hz
Rated current Printer: 6.8 - 3.2 A
Ink unit: 1.4 A
Power consumption
In use Printer: Approx. 140 W
Ink unit: Approx. 28 W
Ready mode Printer: Approx. 100 W
Ink unit: Approx. 11 W
Sleep mode Printer: Approx. 12 W
Ink unit: Approx. 8 W
Power off Printer: Approx. 0.9 W
Ink unit: Approx. 0.04 W
Printer Specifications
Temperature Recommended: 15 to 25˚C
Operating: 10 to 35 ˚C
Storage: -20 to 40 ˚C (within one
month at 40 ˚C)
Humidity
(without conden‐
sation)
Recommended: 40 to 60%
Operating: 20 to 80%
Storage: 5 to 85%
Operating temperature/humidity
Gray area: When in use
Diagonal line area: Recommended
Dimension (W) 1712 x (D) 1809 x (H) 1336 mm
Weight Approx. 330 Kg
(When supplied platen is installed,
not including ink supply units)
* Use a shielded twisted pair cable (category 5 or better).
Note:
To ensure the colors you want to print, maintain a
constant room temperature of 15 to 25 ˚C.
c
Important:
Use this printer at altitudes below 2000 m.
Warning:
This is a class A product. In a domestic environment
this product may cause radio interference in which
case the user may be required to take adequate
measures.
SC-F3000 Series User's Guide
Appendix
147