Specifications for ink supply unit, and cleaning ink
supply unit
Type Dedicated ink supply unit
Types of ink Pigment ink
Expiry date Time limit printed on the package
and ink supply unit (when stored at
normal temperature)
Print quality
guarantee expiry
1 year (after installed in printer)
Temperature Operating: 10 to 35 ˚C
In storage (in package) and after
installation in printer: -20 to 40 ˚C
(within 4 days at -20 ˚C, a month at
40 ˚C)
Transporting (in package): -20 to 60
˚C (within 4 days at -20 ˚C, a month
at 40 ˚C, 72 hours at 60 ˚C)
Dimensions (W) 180 x (D) 410 x (H) 30 mm
Capacity 1500 ml
c
Important:
Do not refill the ink.
Pre-treatment liquid specifications
Expiry date See the date printed on the
package (at normal temperature)
Temperature Cotton pre-treatment liquid
Operating: 10 to 35 ˚C
In storage (in package):
-20 to 40 ˚C (within 4 days at -20 ˚C, a
month at 40 ˚C)
Transporting (in package):
-20 to 60 ˚C (within 4 days at -20 ˚C, a
month at 40 ˚C, 72 hours at 60 ˚C)
Polyester pre-treatment liquid
Operating: 10 to 35 ˚C
In storage (in package):
0 to 40 ˚C (within 4 days at 0 ˚C, a
month at 40 ˚C)
Transporting (in package):
-20 to 60 ˚C (within 4 days at -20 ˚C, a
month at 40 ˚C, 72 hours at 60 ˚C)
Pre-treatment liquid specifications
Capacity Cotton pre-treatment liquid
20 L
Polyester pre-treatment liquid
18 L
Dimensions (W) 300 x (D) 300 x (H) 300 mm
Ink cleaner specifications
Expiry date See the date printed on the
package (at normal temperature)
Temperature Operating: 10 to 35 ˚C
In storage (in package):
-20 to 40 ˚C (within 4 days at -20 ˚C, a
month at 40 ˚C)
Transporting (in package):
-20 to 60 ˚C (within 4 days at -20 ˚C, a
month at 40 ˚C, 72 hours at 60 ˚C)
Capacity 150 ml
Information of EU declaration of conformity
The full text of the EU declaration of conformity of this
equipment is available at the following internet address.
https://www.epson.eu/conformity
SC-F3000 Series User's Guide
Appendix
148
To Next Page
Loading...
Need help?
General