Item Parameter Explanation
Auto Reset
Off
*
Select Off (do not automatically reset the value for print length) or
After Last Page (reset when starting to print the next job).
When Off is selected, the value does not reset until you perform
Manual Reset. However, once the value reaches 9999, it automatically
resets and returns to 0.
When After Last Page is selected, the value returns to 0 when printing
starts for the next job so you can check the print length per job. You can
also check how far along the print job is while printing.
After Last Page
Manual Reset When a reset is performed, the value for print length returns to 0.
Media Management items
When you select the Media Type when loading media, or download an EMX file using the supplied Epson Edge
Print or Epson Edge Dashboard and register the media setting values to the printer, the media setting values are
already set to match the media being used and therefore do not need to be changed. When using special media or
when a problem such as head striking or banding is detected in printing results, change the default.
The default settings for each of the following items differ depending on the content set in Media Type.
Item Parameter Explanation
Change Name Assign a name of up to 20 characters to the Media Settings being saved.
Using distinctive names makes it easier to select banks for use.
Media Type Thin 50g/m2 Select the Media Type according to the loaded media using media
thickness (weight) as a guideline.
The guidelines for the paper weight (g/m2) of each Media Type are as
follows. The paper weights of each Media Type shown on the screen are
typical values.
Thinnest: 60 or under
Med-Thick: 61 to 89
Thick: 90 or more
The printer stores the optimum media settings according to the Media
Type. When the Media Type is changed, each setting for media
registered to the current media setting number changes to the value for
the Media Type after changing.
U “Media Settings List for Each Media Type” on page 100
Med-Thick 70g/m2
*
Thick 120g/m2
Advanced Settings
SC-F6400 Series/SC-F6400H Series User's Guide
Control Panel Menu
80
To Next Page
Loading...
Need help?
General