Epson SC-F9200 series - Page 24

SC-F9200 Series Rev.A
24
Attach 6pcs plates for strengthen stand
(1) Home and Front side (1pcs)
1. Remove tape on tube.
2. Make sure 2 holes are smaller.
3. Loosen 2 screws and slide the plate to fix onto the stand.
4. Tighten 2 screws.
5. Tighten 2 more screws on front side
Tighten
Loosen
このイメージは、現在表示できません。
D2 x 2
Tighten