Need help?Do you have a question about the Epson SC-F2000 and is the answer not in the manual?
General| Printer Type | Direct-to-garment printer |
|---|---|
| Print Technology | Inkjet |
| Print Resolution | 1440 x 1440 dpi |
| Media Thickness | Up to 25 mm |
| Connectivity | USB 2.0, Ethernet |
| Ink Colors | Cyan, Magenta, Yellow, Black |
| Printable Area | 16 x 20 inches |
| Print Speed | Approx. 10 seconds per print (A4 size) |
| Operating System Compatibility | Windows 7, Windows 8, Windows 8.1, Windows 10 |
Details the main features of the SC-F2000 series garment direct ink jet printer.
Covers essential specifications including print method, resolution, memory, and interface.
Details the types of fabric and media supported, including dimensions and weight.
Provides dimensions, weight, installation room requirements, and part names.
Explains the functions of the operation panel buttons, screen, and lamps.
Basic procedures for troubleshooting printer problems quickly and efficiently.
Describes remedies for maintenance requests, referencing hexadecimal codes.
Details service call error messages, causes, check items, and remedies.
Troubleshooting print quality issues classified by observed symptoms.
Addresses general troubles like printer power issues and network access failures.
Describes common issues and remedies related to the Service Program software.
Troubleshooting common issues encountered with the NVRAM Viewer.
Introduction to disassembly procedures for SC-F2000 main components.
Essential warnings and cautions before starting disassembly or reassembly.
Illustrates the main components of the printer's housing.
Provides flowcharts for disassembling consumables, housing, and circuit components.
Detailed steps for disassembling and reassembling printer components.
Describes the Service Program utility and adjustment procedures after repair.
Lists adjustments required by part, their order, and required tools.
Details common adjustments like CR Belt Tension, Nozzle Check, and Cleaning.
Procedures for reading, backing up, and viewing NVRAM parameters.
Executes specific adjustments required for repairs individually.
Executes required adjustments sequentially based on replaced parts.
Explains the procedure for updating the printer's firmware.
Resets life counters after replacing parts for accurate maintenance calls.
Covers adjustments related to the CR unit, like belt tension and scale checks.
Procedures for checks and adjustments concerning the print head.
Covers checks and adjustments for ink supply systems like discharge and cleaning.
Details adjustments for the TF mechanism, including belt tension and sensor checks.
Procedures for adjusting electrical components like NVRAM and MAC address.
Information on maintaining the printer for optimum operating condition.
Guidelines for storing the printer, especially for long-term periods.
Precautions and methods for safely transporting the printer.
Lists parts that require exchange based on maintenance or service calls.
Procedures for cleaning printer parts like the cap and suction cap.
Details necessary lubrication points, lubricants, and amounts for printer parts.
Visual representation of the printer's electrical system connections.
Diagrams illustrating connections for various sensors and assemblies.
Provides a map of executable menus available on the control panel.
A conversion table showing part names used in the manual vs. ASP part names.
To Next Page