SC-F2000 Revision C
PRODUCT DESCRIPTION Available media specifications 15
Confidential
1.3 Available media specifications
AVAILABLE MEDIA
Available for fabric or clothing from 100% cotton to 50% cotton blend whose
thickness is up to 15 mm (mainly T-shirts).
Supports up to 25 mm after recombining platen.
Do not print on uneven sides where zippers or fasteners are attached (printing
sides should be flat).
Print the adjustment pattern and the status sheet on the paper.
PRINTABLE DIMENSION
Printable width: 0 to 406 mm (16 inches)*
Printable length: 0 to 508 mm (20 inches)*
Media thickness: less than 15.0 mm (adjusting width 13 mm)
* For the maximum size, use the optional platen L size.
SUPPORTED SIZE OF EACH TRAY
Platen L size: 406 x 508 mm
Platen M size: 356 x 406 mm (bundled with the product)
Medium Grooved Platen: 356 x 406 mm
Platen S size: 254 x 305 mm
Extra Small Platen: 178 x 203 mm
EXAMPLE FOR TYPES OR USE
T-shirt or fabric of 100% cotton
T-shirt or fabric of 50% or more cotton blend
Tote bag
Handkerchief
Paper
MEDIA WEIGHT
T-shirts or other fabrics: up to 1.5 kg
AVAILABLE MEDIA FORM
Clothes whose thickness is up to 15.0 mm (25.0 mm after switching) with flat printing
side.
Exceptions are shown below.
Materials with uneven sides or outshoots.
Fuzzy materials.
(If so, heat-press is recommended before printing.)
To Next Page
Loading...
Need help?
General