Epson SC-F2000 - 1.2 Basic Specifications

SC-F2000 Revision C
PRODUCT DESCRIPTION Basic Specifications 13
Confidential
1.2 Basic Specifications
1.2.1 Basic Specifications
*Nozzle set configuration is;
1.2.2 Electric Specifications
Table 1-2. Basic Specifications
Item content
Print method On-demand inkjet
Nozzle
configuration*
White Ink Mode
 White: 720 nozzles x 2
 Color: 360 nozzles x 4 (colors)
Color Ink Mode 360 nozzles x 4 (colors)
High Speed Color Mode 720 nozzles x 4 (colors)
Maximum
resolution
White 1440 x 1440 dpi
Color 1440 x 720 dpi
Control code ESC/P Raster
Platen feed method Belt Drive Feeding
Built-in memory
For Main 512 MB
For Network 128 MB
Interface
 USB2.0 HS
 Ethernet (10Base-T/100Base-TX)
Temperature
Operating 10°C to 35°C
Storage (before unpacking)
-20°C to 60°C (within 120 hours at 60°C,
within a month at 40°C)
Storage (after unpacking) -20 to 40°C (within a month at 40°C)
Humidity (without
condensation)
Operating 20 to 80%
Storage (before unpacking) 5 to 85%
Storage (after unpacking) 5 to 85%
Mode RowA RowB RowC RowD RowE RowF RowG RowH RowI RowJ
White Ink
Mode
CMWW- -WWYK
Color Ink
Mode
C M CL CL - - CL CL Y K
High Speed
Color Mode
CMYK - - KYMC
Table 1-3. Electric Specifications
Item Specification
Rated voltage 100 to 240 VAC
Rated frequency 50/60 Hz
Rated current 0.7 A - 0.4 A
Power
consumption
Operating Approx. 52 W
Sleep mode Approx. 10 W
Power OFF 0.5 W or less
Insulation strength
1.0 kV rms AC for 1 min. or 1.5 kV rms AC for 1 sec.
(between AC line and chassis)