Epson SC-F2000 - Initial Ink Charge

SC-F2000 Revision C
ADJUSTMENT Ink Supply Related Checks and Adjustments 250
Confidential
[Blue]: Button or menu name on the program screen / [Black]: Button or menu name on the operation panel of the printer
4.12.3 Initial Ink Charge
EXECUTION MODE
Normal Mode
PROCEDURE
1. Turn the printer ON.
2. Start the Service Program and select [Initial ink charge].
3. Install the ink cartridges into all the ink holders.
4. Click [RUN] to start the initial ink charge.
Figure 4-51. [Initial ink charge] Screen
C H E C K
P O I N T
Required time for the initial ink charge is about 20 minutes.