❏ Do not place exposed media directly on the floor.
Media should be rewound and inserted in its
original packaging for storage.
❏ Do not carry media with the media surface
pressed against clothing.
Handle media in its individual packaging until
just before loading the media in the printer.
❏ Do not store the media uncovered.
Otherwise, the edges of the media may become
wavy or curled resulting in the media coming into
contact with the print head during printing which
could cause a malfunction to occur.
❏ Leaving media in the printer for extended periods
may cause it to deteriorate.
Handling Media After Printing
To maintain long lasting, high quality print results,
note the following points.
❏ Do not rub or scratch the printed surface. If they
are rubbed or scratched, the ink may peel off.
❏ Do not touch the printed surface, as this may
remove the ink.
❏ Avoid direct sunlight.
❏ To prevent discoloration, display and store prints
as instructed in the documentation supplied with
the media.
SC-R5000 Series/SC-R5000L Series User's Guide
Introduction
29
To Next Page
Loading...
