Need help?Do you have a question about the Epson SC-P600 and is the answer not in the manual?
General| Print Technology | Inkjet |
|---|---|
| Max Print Resolution | 5760 x 1440 dpi |
| Number of Ink Colors | 9 |
| Ink Cartridge Configuration | Individual cartridges |
| Connectivity | USB 2.0, Ethernet, Wi-Fi |
| Ink Colors | Cyan, Magenta, Yellow, Gray |
| Max Print Size | 13" x 19" |
| Media Handling | Sheet feed, roll paper |
| Paper Sizes | A4, A3, 13" x 19", 4" x 6", 5" x 7", 8" x 10" |
| Borderless Printing | Yes |
| Display | 2.7" Color LCD |
| Weight | 35.3 lb (16 kg) |
| Ink Type | UltraChrome HD |
Explains the various symbols used throughout the manual for warnings and information.
Provides a general overview of disassembly and reassembly procedures for printer parts.
Lists the specific tools required for disassembly and reassembly tasks.
Details specialized jigs used for adjustment and maintenance procedures.
Outlines essential safety and procedural precautions to take before starting disassembly.
Describes steps for preparing the printer for shipping or return to the user.
Introduces the flowchart format for detailed disassembly and reassembly steps.
Presents flowcharts illustrating the sequence of part disassembly and reassembly.
Details the disassembly/reassembly flowchart for the printer's housing components.
Illustrates the disassembly/reassembly flowchart for the printer's main mechanism parts.
Provides in-depth, step-by-step instructions for disassembling and reassembling individual printer parts.
Explains correct procedures for routing Flexible Flat Cables (FFCs) and other cables within the printer.
Lists required adjustments based on repaired/replaced parts and their recommended order.
Describes the general purpose and method for various adjustment items.
Details the procedure for adjusting the PF Timing Belt tension.
Explains how to adjust the PF Roller Shaft center support position for paper feed.
Outlines the procedure to adjust ASF Guide Roller LDs position for paper feed accuracy.
Describes the process for PG (Positioning Gear) adjustment to ensure print quality.
Details the procedure for checking the printer's mist recovery system voltage.
Explains the process for performing initial settings, e.g., MAC address and serial number.
Provides steps for adjusting the print head's angular position in the CR/PF direction.
Covers the process of calibrating printer colors to match standard units.
Explains the purpose and necessity of colorimetric calibration after part replacement.
Details the step-by-step workflow for performing colorimetric calibration using ColorBase2.
Describes options available within the ColorBase2 maintenance menu.
Details how to check the functionality and operation of the printer's ink selector.
Explains the procedure for calibrating the printer's touch screen interface.
Provides general information on maintaining the printer for optimal performance.
Outlines procedures for cleaning printer parts, including exterior and interior components.
Lists types of grease and shipping liquid required for printer lubrication.
Details specific points and instructions for applying lubricants to printer parts.
Describes the sequence of operations the printer performs when powered on.
Illustrates the printer's internal connector layout and cable connections.
Lists fatal error codes, their possible causes, and suspect parts for troubleshooting.
To Next Page