Settings item Settings value Explanation
Remove Skew
On
*
Select whether to enable (On) or disable (Off) paper skew reduction.
Off
Manage Remaining Amount
Setup On Select whether to display/record (On) or not to display/ record (Off)
the amount of remaining roll paper. Set On to enable Remaining
Amount and Remaining Alert.
U “For Roll Paper” on page 44
Off
*
Remaining Amount 5.0 to 150.0 m
(30
*
)
Entering the total length of the loaded roll paper in Remaining
Amount displays an estimate of remaining amount of roll paper on
the printer's Home screen and on the printer driver screen.
In Remaining Alert, set the limit at which to display a warning when
the amount of remaining roll paper drops below that limit. You can
set in 0.1 m increments.
Also, when the roll paper is removed, the remaining amount, setting
value of Remaining Alert, and paper type are automatically converted
to a barcode which is printed at the end of the roll paper. The printer
automatically reads the barcode and sets the settings when you load
the roll paper next time.
Remaining Alert
1.0 to 15.0 m (5.0
*
)
Change Paper Type
Paper Type
Plain paper
*
Select the type of the loaded paper. The three options other than
Others display the most recently selected paper type. When the
desired paper type is not displayed, touch Others to display the other
paper types and then select a paper type.
U “For Roll Paper” on page 44
Coated
Paper(Generic)
Premium Glossy
Sheet
Others
Paper Width A Series
This is displayed if Advanced Media Setting - Paper Size Check is set
to Off.
Select the width of the loaded paper.
If the desired size is not in the options, select User-Defined and enter
the paper width.
US-ANSI
US-ARCH
B Series (ISO)
B Series (JIS)
Others
User-Defined
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Using the Menu
139
To Next Page
Loading...
Need help?
General