Settings item Settings value Explanation
Color Mode (Com‐
mon)
EPSON Standard
(sRGB)
Optimize the sRGB space and correct the color.
Business Graphics
*
Perform color correction to sharpen your images based on the sRGB space.
GIS Perform color correction suitable for when printing GIS (Geographic
Information System) topographical maps or similar.
Line Drawing Perform color correction suitable for CAD drawings and other line drawings.
Off (No Color
Management)
Do not perform color correction.
HP-GL/2 Unique Settings
(Print settings inherent to HP-GL/2 or HP RTL modes.)
Rotate
0˚
*
You can rotate the coordinates of the drawn data counterclockwise in units
of 90˚ before printing. Note that objects drawn by RTL are not rotated. When
both this setting and the RO command specify rotation, rotation is
performed using the combined amount of both values. Note that rotation
by the RO command is for objects only (the arrow section in the following
illustration), and rotation is not performed for the drawn area (the square
section in the following illustration). As a result, objects in a section that
protrude from the drawn area are not printed.
90˚
180˚
270˚
Origin Setup
Left Edge
*
Set the data coordinate origin.
Center
Mirror Image On Select whether to flip horizontally (mirror) using the center of the output
size width as the basis line and then print (On) or print without flipping
horizontally (Off).
If an angle is specified for rotate, the rotated result is flipped horizontally.
Off
*
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Using the Menu
154
To Next Page
Loading...
Need help?
General