Epson SC-T5455 User Manual

Settings item Settings value Explanation
Reduce/Enlarge
Auto Fit Page On
Set to On to print so that the short edge of the original fits the width of
the paper loaded in the printer.
If the short edge of the document is wider than the paper, printing will
be at actual size.
If the paper is not loaded as set in Paper Source of Basic Settings, this
cannot be set to On. Furthermore, if the settings for the Paper Source
are changed without replacing or loading the paper after setting this
to On, the settings return to the actual size in the default settings. If
the printer is unable to detect the width of the paper, an error will
occur when the Print button is touched.
Off
*
Custom Size
Actual Size
*
, User-Defined
Select the output size. If the Actual Size is not selected, set the desired
size in User-Defined.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Using the Menu
184

Epson SC-T5455 Specifications

General

Brand	Epson
Model	SC-T5455
Category	Printer
Language	English