If the pattern has missing areas, touch to
display the Head Cleaning screen. Proceed to the
next step.
D
Touch Start to start cleaning.
When cleaning is complete, Print the pattern?
will be displayed. Touch Yes to return to Step 2.
Repeat Steps 2 to 4, and check if the problem has
been resolved.
If the nozzles are still clogged after performing print
head cleaning three times in a row, then perform
Powerful Cleaning.
Select Maintenance - Powerful Cleaning to perform
Powerful Cleaning.
U “Maintenance” on page 163
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Problem Solver
200
To Next Page
Loading...
Need help?
General